The variety of insulation and sensor listed in sample all adopt epoxy vacuum pouring technology for one-time molding,kinds of bushing,contact box,insulating cylinder and bell housing etc adopt APDA technology for molding(majority).
All the product are applied to 3.6~40.5KV mid-large volt switchboard ,for some product and specification size owning special requirement ,it could be designed and manufactured according to user demand.
Normal Operation Environment Condition
1.Altitude can’t exceed 1000m,and the altitude of plateau type can’t exceed 3000m.
2.Surrounding temperature ranges from -10°C to +40°C,and the daily average temperature.
3.Daily average value of Relative humidity can’t exceed 95%,and the monthly average.
4.There is no any dust,smoke,pollution of corrosive or flammable air,vapor and salt fog.
5.There is no any frequent vibration or bumping in installation place.
6.The product all could run in the case of dew and II feculence condition.
Exterior and installation drawing view
We are specialty on epoxy resin medium voltage and high voltage components,
such as 12KV, 24 KV, 36KV and 40.5KV switchgear bushing, contactor box, insulators, Indoor AC high voltage earthing switch ,transducers.
630A, 1250A, 2500A, 3150A and 4000A contactor box, club contact, fix contact, arm contact and jaw contact. 630A and 1250A VS1 circuit breaker. 630A and 1250A ZN85-40.5 circuit breaker.
12KV and 24KV earth switch. KYN28A-12 and KYN61 high voltage switchgear components!
1. What's the payment term?
T/T, L/C, Western Union
2. What's the delivery time?
Within 20 working days after receive deposit and confirm details.
3. Can you offer test report of the product?
We test every product before packing.
4. Can you offer components of the products?
Yes, we also sell components separately.
We will give you the reasonable price and best service!